The labelling system, and the identifiers used, are agreed upon by all stakeholders; and Labelling is all-encompassing and include cables, connecting hardware, conduits, firestops, grounding and bonding locations, racks, cabinets, ports, and telecommunications spaces. 10.6.30.R.02. Rationale Specific labelling requirements include: All labels use a permanent identifier; The labelling/numbering scheme is logical in its organisation, using alphanumeric characters for ease of reference; Each cable and each pathway is labelled on each end, and each label identifies the termination points of both ends of the cable; All labels are legible, defacement resistance, and have high adhesion characteristics and durability; Labels are placed so they can be read without disconnecting a cable; Labels for station connections may appear on the face plate; All jack, connector, and block hardware are be labelled on either the outlet or panel; and All labels match with the any installation and maintenance records. 10.6.30.C.01. ControlSystem Classification(s): Confidential, Secret, Top Secret; Compliance: SHOULD [CID:5627] Agencies SHOULD implement the principles and specific cable labelling requirements described above. 10.6.31. Power Cords 10.6.31.R.01. Rationale It is important to separate copper data cables and power cables as all power feeds, line and connectors have the potential to emanate, create magnetic fields and cause interference with copper data cables if laid in close proximity to each other. Good practice is to: Label power cords at both ends to minimise the risk inadvertently disconnecting the wrong power cord; Colour code power cords and power strips; Use locking power cords, receptacles, or retention clips. 10.6.31.C.01. ControlSystem Classification(s): Confidential, Secret, Top Secret; Compliance: SHOULD [CID:5619] Agencies SHOULD follow best practice described above for the installation of power cables. 10.7. Emanation Security Threat Assessments Objective 10.7.1. In order to minimise compromising emanations or the opportunity for a technical attack, a threat assessment is used to determine appropriate countermeasures. Context Scope 10.7.2. This section relates to emanation security threat assessment advice and identification of appropriate countermeasures to minimise the loss of classified information through compromising emanations or a technical attack. 10.7.3. This section is applicable to: agencies located outside New Zealand; secure facilities within New Zealand; and mobile platforms and deployable assets that process classified information. References 10.7.4. Information on conducting an emanation security threat assessment and additional information on cabling and separation standards, as well as the potential dangers of operating RF transmitters in proximity to classified systems, is documented in: Reference NZCSS 400 Title Installation Engineering Publisher Source GCSB CONFIDENTIAL document available on application to authorised personnel NZCSI 403B TEMPEST Threat and GCSB CONFIDENTIAL document available Countermeasures Assessment on application to authorised personnel NZCSI 420 Laboratory Tempest Test GCSB CONFIDENTIAL document available Standard for Equipment in on application to authorised Controlled Environments personnel PSR references 10.7.5. Relevant PSR requirements can be found at: Reference 112 Title Source Version_3.5__January-2022

Select target paragraph3

Connect to a paragraph
Connect to an entity
Disable highlights
Add to table of contents