13.5.22.R.01. Rationale Documenting procedures for media and IT equipment destruction will ensure that destruction is carried out in an appropriate, consistent and responsible manner within the agency. 13.5.22.C.01. ControlSystem Classification(s): All Classifications; Compliance: MUST [CID:4270] Agencies MUST document procedures for the destruction of media and IT Equipment. 13.5.23. Media and IT Equipment destruction 13.5.23.R.01. Rationale The destruction methods given are designed to ensure that recovery of data is impossible or impractical. Health and safety training and the use of safety equipment may be required with these methods. 13.5.23.C.01. ControlSystem Classification(s): All Classifications; Compliance: MUST [CID:4276] To destroy media and IT Equipment agencies MUST use at least one of the methods shown in the following table. Item Destruction methods Furnace/ Incinerator Hammer mill Disintegrator Grinder/ Sander Cutting Degausser Magnetic floppy disks Yes Yes Yes No Yes Yes Magnetic hard disks Yes Yes Yes Yes No Yes Magnetic tapes Yes Yes Yes No Yes Yes Optical disks Yes Yes Yes Yes Yes No Electrostatic memory devices Yes Yes Yes No No Semi-conductor memory Yes Yes Yes No No No Other Circuit Boards Yes Yes Yes No No No Yes 13.5.24. Destruction methods for media and IT equipment 13.5.24.R.01. Rationale Where an agency does not perform its own destruction of media and IT equipment, an approved facility must be used. Agencies that do perform destruction of media and IT equipment must use equipment that complies with the NZISM. 13.5.24.R.02. Rationale A variety of equipment for media and IT Equipment destruction exists. Evaluated products will provide assurance that the product will be effective. Approved products are discussed in Chapter 12 - Product Security. 13.5.24.R.03. Rationale Where a product or service is not an evaluated product or is NOT listed in thePSR, agencies must consult the GCSB for advice. 13.5.24.R.04. Rationale Equipment can be dismantled or pre-processed before disposal. Care MUST be taken to ensure safe handling of any potential poisonous, carcinogenic or toxic materials. 13.5.24.R.05. Rationale Where incineration is the disposal method of choice, users must ensure the facility is properly rated for the incineration of electronic waste (WEEE) and the safe handling of any poisonous, carcinogenic and toxic materials produced in the incineration process. The facility must also be properly authorised or licenced to operate. 13.5.24.C.01. ControlSystem Classification(s): All Classifications; Compliance: MUST [CID:4302] Media and IT equipment destruction MUST be performed using approved destruction equipment, facilities and methods. 13.5.24.C.02. ControlSystem Classification(s): All Classifications; Compliance: MUST [CID:4304] Where agencies do not own their own destruction equipment, agencies MUST use anapproved destruction facility for media and IT equipment destruction. 13.5.24.C.03. ControlSystem Classification(s): All Classifications; Compliance: MUST [CID:7165] Where a facility is NOT an approved facility, agencies MUST ensure any incineration equipment is rated for the destruction of electronic waste (WEEE) and the operator is properly authorised or licensed. 13.5.24.C.04. ControlSystem Classification(s): All Classifications; Compliance: MUST [CID:7166] Where a facility is NOT an approved facility, agencies MUST ensure processes are in place for the safe handling of electronic waste (WEEE), including any residual material from the destruction process. 13.5.25. Storage and handling of media and IT Equipment waste particles 13.5.25.R.01. Rationale Following destruction, normal accounting and auditing procedures do not apply. As such, it is essential that when an item is recorded as being 182 Version_3.5__January-2022

Select target paragraph3

Connect to a paragraph
Connect to an entity
Disable highlights
Add to table of contents