devices can connect to IT equipment and act as unauthorised data storage devices or bridge “air gaps”.
11.1.11.C.01. ControlSystem Classification(s): Confidential, Secret, Top Secret; Compliance: MUST
[CID:2497]
Agencies MUST prevent RF devices from being brought into secure areas unless authorised by the Accreditation Authority.
11.1.11.C.02. ControlSystem Classification(s): All Classifications; Compliance: SHOULD
[CID:2498]
Agencies SHOULD prevent RF devices from being brought into secure areas unless authorised by the Accreditation Authority.
11.1.12. Detecting RF devices in secure areas
11.1.12.R.01. Rationale
As RF devices are prohibited in secure areas, agencies should deploy technical measures to detect and respond to the unauthorised use of such
devices.
11.1.12.C.01. ControlSystem Classification(s): Confidential, Secret, Top Secret; Compliance: SHOULD
[CID:2501]
Agencies SHOULD deploy measures to detect and respond to active RF devices within secure areas.
11.1.13. RF controls
11.1.13.R.01. Rationale
Minimising the output power of wireless devices and using RF shielding on facilities will assist in limiting the wireless communications to areas
under the control of the agency.
11.1.13.C.01. ControlSystem Classification(s): All Classifications; Compliance: SHOULD
[CID:2504]
Agencies SHOULD limit the effective range of communications outside the agency’s area of control by:
minimising the output power level of wireless devices;
RF shielding; and
Physical layout and separation.
11.2. Fax Machines, Multifunction Devices and Network Printers
Objective
11.2.1. Fax machines, multifunction devices (MFD’s) and network printers are used in a secure manner.
Context
Scope
11.2.2. This section covers information relating to fax machines, MFDs and network printers connected to either the ISDN, PSTN, HGCE or other networks.
Further information on MFDs communicating via network gateways can be found in Section 20.2 - Data Import and Export.
Rationale & Controls
11.2.3.
Fax machine, MFD and network printer usage policy
11.2.3.R.01.
Rationale
Fax machines, MFDs and network printers are capable of communicating classified information, and are a potential source of information
security incidents. It is therefore essential that agencies develop a policy governing their use.
11.2.3.C.01.
System Classification(s): All Classifications; Compliance: MUST
Control
[CID:2537]
Agencies MUST develop a policy governing the use of fax machines, MFDs, and network printers.
11.2.4.
Sending fax messages
11.2.4.R.01.
Rationale
Once a fax machine or MFD has been connected to cryptographic equipment and used to send a classified fax message it can pose risks if
subsequently connected directly to unsecured telecommunications infrastructure or the public switched telephone network (PSTN). For
example, if a fax machine fails to send a classified fax message the device will continue attempting to send the fax message even if it has been
disconnected from the cryptographic device and connected directly to the public switched telephone network. In such cases the fax machine
could then send the classified fax message in the clear causing an information security incident.
11.2.4.R.02.
Rationale
Non-encrypted communications may be exposed in transmission and, if incorrectly addressed or an incorrect recipient number is entered, may
cause a data breach.
11.2.4.C.01.
ControlSystem Classification(s): Confidential, Secret, Top Secret; Compliance: MUST
[CID:2543]
Agencies sending classified fax messages MUST ensure that the fax message is encrypted to an appropriate level when communicated over
unsecured telecommunications infrastructure or the public switched telephone network.
11.2.4.C.02.
ControlSystem Classification(s): Confidential, Secret, Top Secret; Compliance: MUST
[CID:2545]
Agencies MUST have separate fax machines or MFDs for sending classified fax messages and messages classified RESTRICTED and below.
11.2.5.
Sending fax messages using HGCE
11.2.5.R.01.
122
Rationale
Version_3.5__January-2022
Select target paragraph3
Connect to a paragraph
Connect to an entity
Disable highlights
Add to table of contents