4
Active tags (own power source) with integrated transmitter. Can
communicate with readers and other tags operating in the same RF band.
Rewritable memory and ad hoc networking capability. Read range >100
metres (approx. 300’).
5
Reader tags, can power class 1 to 3 tags and communicate with all classes.
Includes all the capabilities of class 4 tags.
Operating Frequencies
11.6.11. RFID operates in several parts of the Radio Spectrum. Not all frequencies are authorised for use in all countries and will depend on the radio spectrum
allocation authority in each country. It is important to note, however, that some RFID tags designed to operate at frequencies not used in the importing
country may be attached to imported goods. This can represent a risk from scanning at frequencies not authorised or normally monitored in the
importing country.
11.6.12. Depending on the design and intended application, RFID tag can operate at different frequencies. It is important to note that longer range RFID tags
operate at frequencies close to or within allocated Wi-Fi frequencies. Allocated frequencies are:
Band
Frequency
Typical Range
LF
125-134.2 kHz and 140-148.5 kHz
Up to 1/2 metre
HF
13.553 - 13.567 MHz and 26.957 - 27.283 MHz
Up to 1 metre
UHF
433 MHz, 858 - 930 MHz, 2.400 - 2.483 GHz,
1 to 10 metres
2.446 - 2.454GHz
SHF
5.725 - 5.875 GHz
> 100 metres
11.6.13. As RFID devices are deployed in more sophisticated applications such as matching hospital patients with laboratory test results or tracking systems for
dangerous materials, concerns have been raised about protecting such systems against eavesdropping, unauthorised uses and privacy breaches.
Smart Cards
11.6.14. Smart cards typically comprise an embedded integrated circuit incorporating a microchip with internal memory, a read-only CSN (Card Serial Number)
or a UID (User Identification). The card connects to a reader with direct physical contact or a contactless radio frequency (RFID) interface. With an
embedded microchip, smart cards can store large amounts of data, carry out on-card functions (such as encryption and authentication) and interact
intelligently with a smart card reader. Smart card technology can be found in a variety of form factors, including plastic cards, key fobs, watches,
subscriber identification modules used in mobile phones, and USB-based tokens. Smart cards are widely used in payment card (debit and credit cards
and electronic wallets) and access control systems.
11.6.15. The ISO/IEC 14443 standard for contactless smart card communications defines two types of contactless cards ("A" and "B") and allows for
communications at distances up to 10 cm operating at 13.56 MHz. The alternative ISO/IEC 15693 standard allows communications at distances up to 50
cm. The ISO/IEC 7816 standard (in 15 parts) defines the physical, electrical interface and operating characteristics of these cards.
11.6.16. In common with other RFID devices, smart cards incorporate an antenna embedded in the body of the card (or key fob, watch or token). When the card
is brought within range of the reader, the chip in the card is powered on. Once powered on, an RF communication protocol is initiated and
communication established between the card and the reader for data transfer.
11.6.17. Smart cards typically incorporate protective mechanisms including authentication, secure data storage, encryption, tamper-resistance and secure
communication. Support for biometric authentication may also be incorporated.
Threats and Vulnerabilities
11.6.18. Some important characteristics of RFID, inherent in the design and properties of the technology are:
RFID tags are powered by the field emitted by an RFID reader, so whenever a tag is placed in a reader field it is activated and available. In
general terms, class 0 and class 1 tags cannot be powered off, only permanently deactivated;
RFID tags automatically respond to reader interactions without explicit control of the tag owner, so RFID tags can be operated without their
owner’s consent;
It is trivial to establish a communication with an RFID tag and there is no visual confirmation of a tag/reader interaction (i.e., no physical
connection or manual operation is required), so it is possible to interact with an RFID tag without being detected.
11.6.19. Specific threats and vulnerabilities in the use of RFID technologies include:
Legitimate data-mining: This risk predates the use of RFID technology, but the volume of data provided by RFID tags, loyalty cards, Near Field
Communication (NFC) for bank cards and for electronic wallets increases the risk. Some data collection methods keep to ethical use of datamining techniques to discover the characteristics and habits of an individual or an organisation. This can pose a business intelligence risk. At
times, however, this may challenge the bounds of privacy and data ownership. For example, customer loyalty card data used to discover medical
information about an individual or RFID tags to track shipments or deliveries to an organisation by a competitor.
Eavesdropping and Data theft: This risk is similar to the data-mining risk but employs unethical and possibly illegal methods of data collection
or obtaining data for nefarious or malicious purposes. RFID tags are designed to broadcast information and data theft by easily concealable RFID
scanners is technically trivial. Data theft can pose a risk to business processes.
Skimming: Occurs when an unauthorised reader gains access to data stored on a token. This type of attack is particularly dangerous where
contactless access or payment cards are used.
Relay Attacks: Relay attacks use eavesdropping to intercept legitimate tag/reader transmissions and relay these to a device at some distance
from the legitimate tag. The device can then behave as the genuine tag. Again this type of attack is particularly dangerous where contactless
access or payment cards are used.
Insert Attacks: Insert attacks insert system commands where normal data is expected and relies on a lack of data validation. It is possible that a
132
Version_3.5__January-2022
Select target paragraph3
Connect to a paragraph
Connect to an entity
Disable highlights
Add to table of contents