13.5.22.R.01. Rationale
Documenting procedures for media and IT equipment destruction will ensure that destruction is carried out in an appropriate, consistent and
responsible manner within the agency.
13.5.22.C.01. ControlSystem Classification(s): All Classifications; Compliance: MUST
[CID:4270]
Agencies MUST document procedures for the destruction of media and IT Equipment.
13.5.23. Media and IT Equipment destruction
13.5.23.R.01. Rationale
The destruction methods given are designed to ensure that recovery of data is impossible or impractical. Health and safety training and the use
of safety equipment may be required with these methods.
13.5.23.C.01. ControlSystem Classification(s): All Classifications; Compliance: MUST
[CID:4276]
To destroy media and IT Equipment agencies MUST use at least one of the methods shown in the following table.
Item
Destruction methods
Furnace/ Incinerator
Hammer mill
Disintegrator
Grinder/ Sander
Cutting
Degausser
Magnetic floppy disks
Yes
Yes
Yes
No
Yes
Yes
Magnetic hard disks
Yes
Yes
Yes
Yes
No
Yes
Magnetic tapes
Yes
Yes
Yes
No
Yes
Yes
Optical disks
Yes
Yes
Yes
Yes
Yes
No
Electrostatic memory devices
Yes
Yes
Yes
No
No
Semi-conductor memory
Yes
Yes
Yes
No
No
No
Other Circuit Boards
Yes
Yes
Yes
No
No
No
Yes
13.5.24. Destruction methods for media and IT equipment
13.5.24.R.01. Rationale
Where an agency does not perform its own destruction of media and IT equipment, an approved facility must be used. Agencies that do
perform destruction of media and IT equipment must use equipment that complies with the NZISM.
13.5.24.R.02. Rationale
A variety of equipment for media and IT Equipment destruction exists. Evaluated products will provide assurance that the product will be
effective. Approved products are discussed in Chapter 12 - Product Security.
13.5.24.R.03. Rationale
Where a product or service is not an evaluated product or is NOT listed in thePSR, agencies must consult the GCSB for advice.
13.5.24.R.04. Rationale
Equipment can be dismantled or pre-processed before disposal. Care MUST be taken to ensure safe handling of any potential poisonous,
carcinogenic or toxic materials.
13.5.24.R.05. Rationale
Where incineration is the disposal method of choice, users must ensure the facility is properly rated for the incineration of electronic waste
(WEEE) and the safe handling of any poisonous, carcinogenic and toxic materials produced in the incineration process. The facility must also be
properly authorised or licenced to operate.
13.5.24.C.01. ControlSystem Classification(s): All Classifications; Compliance: MUST
[CID:4302]
Media and IT equipment destruction MUST be performed using approved destruction equipment, facilities and methods.
13.5.24.C.02. ControlSystem Classification(s): All Classifications; Compliance: MUST
[CID:4304]
Where agencies do not own their own destruction equipment, agencies MUST use anapproved destruction facility for media and IT equipment
destruction.
13.5.24.C.03. ControlSystem Classification(s): All Classifications; Compliance: MUST
[CID:7165]
Where a facility is NOT an approved facility, agencies MUST ensure any incineration equipment is rated for the destruction of electronic waste
(WEEE) and the operator is properly authorised or licensed.
13.5.24.C.04. ControlSystem Classification(s): All Classifications; Compliance: MUST
[CID:7166]
Where a facility is NOT an approved facility, agencies MUST ensure processes are in place for the safe handling of electronic waste (WEEE),
including any residual material from the destruction process.
13.5.25. Storage and handling of media and IT Equipment waste particles
13.5.25.R.01. Rationale
Following destruction, normal accounting and auditing procedures do not apply. As such, it is essential that when an item is recorded as being
182
Version_3.5__January-2022
Select target paragraph3
Connect to a paragraph
Connect to an entity
Disable highlights
Add to table of contents