Security Control: ISM-0529; Revision: 6; Updated: Dec-21; Applicability: All; Essential Eight: N/A
VLANs are not used to separate network traffic between networks belonging to different security domains.
Security Control: ISM-0530; Revision: 6; Updated: Dec-21; Applicability: All; Essential Eight: N/A
Network devices managing VLANs are administered from the most trusted security domain.
Security Control: ISM-0535; Revision: 6; Updated: Dec-21; Applicability: All; Essential Eight: N/A
Network devices managing VLANs belonging to different security domains do not share VLAN trunks.
Security Control: ISM-1364; Revision: 3; Updated: Dec-21; Applicability: All; Essential Eight: N/A
Network devices managing VLANs terminate VLANs belonging to different security domains on separate physical
network interfaces.
Using Internet Protocol version 6
The use of Internet Protocol version 6 (IPv6) can introduce additional security risks to networks. As such, an
organisation exclusively using Internet Protocol version 4 (IPv4) should disable IPv6. This will assist in minimising the
attack surface of networks and ensure that IPv6 cannot be exploited by an adversary.
To aid in the transition from IPv4 to IPv6, numerous tunnelling protocols have been developed to allow interoperability
between IPv4 and IPv6. Disabling IPv6 tunnelling protocols on networks that do not require such functionality will
prevent an adversary from bypassing traditional network defences by encapsulating IPv6 data inside IPv4 packets.
Stateless Address Autoconfiguration is a method of stateless Internet Protocol (IP) address configuration in IPv6
networks. Notably, it reduces the ability of an organisation to maintain effective logs of IP address assignments on
networks. For this reason, stateless IP addressing should be avoided.
Security Control: ISM-0521; Revision: 6; Updated: Mar-22; Applicability: All; Essential Eight: N/A
IPv6 functionality is disabled in dual-stack network devices unless it is being used.
Security Control: ISM-1186; Revision: 4; Updated: Mar-22; Applicability: All; Essential Eight: N/A
IPv6 capable network security appliances are used on IPv6 and dual-stack networks.
Security Control: ISM-1428; Revision: 2; Updated: Mar-22; Applicability: All; Essential Eight: N/A
Unless explicitly required, IPv6 tunnelling is disabled on all network devices.
Security Control: ISM-1429; Revision: 3; Updated: Mar-22; Applicability: All; Essential Eight: N/A
IPv6 tunnelling is blocked by network security appliances at externally-connected network boundaries.
Security Control: ISM-1430; Revision: 3; Updated: Mar-22; Applicability: All; Essential Eight: N/A
Dynamically assigned IPv6 addresses are configured with Dynamic Host Configuration Protocol version 6 in a stateful
manner with lease data stored in a centralised event logging facility.
Network access controls
If an adversary has reduced opportunities to physically connect unauthorised network devices to networks, they also
have reduced opportunities to compromise networks. Network access controls can not only prevent unauthorised
physical access to networks, but also prevent personnel from carelessly bridging networks by connecting one network
to another network. Furthermore, network access controls can also be useful for limiting the flow of network traffic
between network segments.
Security Control: ISM-0520; Revision: 6; Updated: Sep-18; Applicability: All; Essential Eight: N/A
Network access controls are implemented on networks to prevent the connection of unauthorised network devices.
Security Control: ISM-1182; Revision: 4; Updated: Mar-22; Applicability: All; Essential Eight: N/A
Network access controls are implemented to limit network traffic within and between network segments to only those
required for business purposes.
116
Select target paragraph3
Connect to a paragraph
Connect to an entity
Disable highlights
Add to table of contents