Secure/Multipurpose Internet Mail Extension
Using Secure/Multipurpose Internet Mail Extension
When using ICT equipment or software that implements S/MIME, security controls for using AACAs and AACPs in the
ASD-Approved Cryptographic Algorithms and ASD-Approved Cryptographic Protocols sections of these guidelines will
also need to be consulted.
Configuring Secure/Multipurpose Internet Mail Extension
S/MIME version 2.0 required the use of weaker cryptography than approved for use in these guidelines. As such,
S/MIME version 3.0 was the first version to be approved for use as an AACP.
Security Control: ISM-0490; Revision: 4; Updated: Mar-22; Applicability: All; Essential Eight: N/A
Versions of S/MIME earlier than S/MIME version 3.0 are not used for S/MIME connections.
Internet Protocol Security
Using Internet Protocol Security
When using ICT equipment or software that implements IPsec, security controls for using AACAs and AACPs in the ASDApproved Cryptographic Algorithms and ASD-Approved Cryptographic Protocols sections of these guidelines will also
need to be consulted.
Mode of operation
IPsec can be operated in tunnel mode or transport mode. The tunnel mode of operation is preferred as it provides full
encapsulation of IP packets while the transport mode of operation only encapsulates the payload of IP packets.
Security Control: ISM-0494; Revision: 3; Updated: Sep-18; Applicability: All; Essential Eight: N/A
Tunnel mode is used for IPsec connections; however, if using transport mode, an IP tunnel is used.
Protocol selection
IPsec contains two major protocols, the Authentication Header (AH) protocol and the Encapsulating Security Payload
(ESP) protocol. In order to provide a secure Virtual Private Network style connection, both authentication and
encryption are needed. While the AH and ESP protocols can both provide authentication, for the IP packet and the
payload respectively, only the ESP protocol can provide encryption.
As the combined use of the AH protocol and the ESP protocol is not supported by Internet Key Exchange (IKE) version 2,
the ESP protocol should be used for authentication and encryption of IPsec connections.
Security Control: ISM-0496; Revision: 5; Updated: Mar-22; Applicability: All; Essential Eight: N/A
The ESP protocol is used for authentication and encryption of IPsec connections.
Key exchange
There are several methods for establishing shared keying material for IPsec connections, including manual keying and
the IKE protocol. As the IKE protocol addresses a number of security risks associated with manual keying, it is the
preferred method for key establishment. Note, as IKE version 1 has been deprecated, IKE version 2 should be used.
Security Control: ISM-1233; Revision: 2; Updated: Mar-22; Applicability: All; Essential Eight: N/A
IKE version 2 is used for key exchange when establishing IPsec connections.
137
Select target paragraph3
Connect to a paragraph
Connect to an entity
Disable highlights
Add to table of contents