– A unique 128-bit Network Session Key shared between the end-device and network server – A unique 128-bit Application Session Key shared end-toend at the application level AES encryption provides authentication and integrity of packets to the network server and end-to-end encryption to the application server. The keys can be Activated By Personalisation (ABP) on the production line or during commissioning or can be Over-The-Air Activated (OTAA) in the field. OTAA allows devices to be re-keyed if necessary. It is possible to use the LoRa physical layer and run a different protocol on top of it, such as Symphony Link 251. Sigfox is a proprietary LPWAN technology that enables remote devices to connect to an access point over Ultra Narrow Band (UNB) frequencies. Sigfox highlights that devices never have the ability to send data to arbitrary entities via internet and can therefore be considered to be protected by a “firewall”. Furthermore, Sigfox devices have the following security features252: – Each Sigfox device is provisioned during manufacturing with a unique symmetrical authentication key. Each message to be sent or received by the device contains a cryptographic token that is computed based on this authentication key. Verification of the token ensures the authentication of the sender (the device for an uplink message, or the Sigfox network for a downlink message) and the integrity of the message. Since the key is unique per device, the compromising of one device has a very limited impact. Sigfox has been working with its ecosystem to increase the security level of devices through the adoption of security best practices. In addition, secure elements dedicated to Sigfox devices are now available to provide tamper resistance. 251 252 253 254 https://www.link-labs.com/symphony https://www.sigfox.com/en/technology/security https://datatracker.ietf.org/wg/lpwan/about/ https://www.gsma.com/iot/news/ new-report-outlines-security-considerations-lpwa-technology/ – Each Sigfox message contains a sequence counter which is verified by the Sigfox Core Network to detect and discard replay attempts. The integrity of the counter is guaranteed by the message authentication token. – By default, data is conveyed over the air interface without any encryption. However, depending on the application, this data may be very sensitive, and its privacy must be guaranteed. Sigfox gives customers the option to either implement their own end-to-end encryption solutions or to rely on an encryption solution provided by the Sigfox protocol. The IETF Working Group “IPv6 over Low Power Wide-Area Networks” is currently focused on enabling IPv6 connectivity over several LPWAN technologies including Sigfox, LoRa, WI-SUN and NB-IOT253. The LPWAN Technology Security Comparison white paper 254 from GSMA and Franklin Heath discusses the security implications and controls for the abovementioned LPWA technologies, identifying that IoT security needs are driven largely by privacy and safety concerns and suggesting that any deployment using LPWA technologies should be subject to a security risk assessment using tools such as the GSMA IoT Security Assessment 255. HyperText Transfer Protocol (HTTP) is the dominant application-layer protocol for the Web and has proven to be very suitable for the navigation of interactive, hyperlinked webpages. For IoT devices, most of which support no direct human interaction, consume very little power and frequently have poor network connectivity, HTTP is unsuitable256: a single HTTP request requires a minimum of nine TCP packets, even without taking packet loss into account. This overhead adds to IoT operating expenses. 255 https://www.gsma.com/iot/iot-security-assessment/ 256 https://www.edn.com/electronics-blogs/eye-on-iot-/4437056/ Why-HTTP-Won-t-Work-for-IoT 75

Select target paragraph3

Connect to a paragraph
Connect to an entity
Disable highlights
Add to table of contents