Sharing Notice: White 7.3 The National Cryptographic Standards Side-Channel Attacks Side-channel attacks on a cryptographic system make use of the results of the system’s physical measurements, such as energy consumption, electromagnetic emanation and time consumption, in order to gain insight into sensitive data17. Attacks can be carried out by remote and passive adversaries which are difficult to be detected and may lead to a significant and unnoticed leakage of data. In order to prevent these attacks, the first step to minimize information leakage is to ensure that for the side channel signals, the signal-to-noise ratio is as low as possible. Further, it must also be ensured that the information leakages from side-channels are not useful for the adversaries18. For example, eliminate any correlation between the binary representation of secret key and side channel signals, i.e. use dummy operations to mask any potential correlation. In order to minimize the risk of side-channel attacks, it is important to satisfy the following requirements19: • Cryptographic operations must be performed in certified hardware components, e.g. smart cards to protect the secret and/or private keys. • Analyse thoroughly the effects of such side channels on certified hardware components in a specialized laboratory during the development process. • Protect ciphertexts using MAC and verify ciphertexts before performing any other cryptographic operations. Side-channel attacks cover a wide range of threat scenarios. Therefore, an extensive review of relevant threat scenarios should be carried out for the proper secure implementation. P. C. Kocher, J. Jaffe and B. Jun, “Differential power analysis,” in Differential power analysis, 2011. A. Vega, P. Bose and A. Buyuktosunoglu, "Rugged Embedded Systems: Computing in Harsh Environments", Morgan Kaufmann, 2017. 19 BSI, "Cryptographic Mechanisms: Recommendations and Key Lengths", BSI - Technical Guideline, 2020. 17 18 24 Document Classification: Open

Select target paragraph3

Connect to a paragraph
Connect to an entity
Disable highlights
Add to table of contents