Model diagram Database of BSUs, around 21,000 records used, BSUs without permanently occupied dwellings filtered out. Estimate of costs for the construction of blanket optical cabling Based on a comparison of a series of projects addressing the laying of the optical part of electronic communications networks in various areas, leading indicators were prepared for the financial demands of the building of blanket optical cabling according to the character of the individual BSUs. These indicators were then used to determine the cost demands of coverage of BSUs with FTTH-type electronic communications networks. Estimate of the costs of internal wiring From the group of analysed projects, unit costs were estimated for the implementation of internal wiring by type of development split into large multi-dwelling buildings (over 15 dwellings per building), medium multi-dwelling buildings (3 to 15 dwellings per building) and family houses. These indicators were then applied to the database of BSUs. Estimate of the costs for connecting BSUs to the backbone optical network Based on an analysis of the group of projects, the unit costs were estimated for supply optical cables according to their length and profile. The profile of a supply optical cable is designed in accordance with the FTTH or FTTN solution used depending on the number of connectable participants with the usually considered reserve. The length of the supply optical cables was then set based on an analysis of the existing networks and access points. Estimate of the costs for technology Within the framework of the solutions used, the costs for a GPON network with FTTH and FTTN topology were analysed. For FTTH the costs were calculated for an operator’s network access point to which participants are connected through a Passive Optical Network (PON) and Optical Network Termination (ONT), meaning a subscriber modem. For FTTN, in addition to OLT the analysis included an Optical Network Unit (ONU), which may be a DSL multiplexer located in an outdoor cabinet or inside a block of flats, or an Ethernet switch located in a block of flats. In the first case we are talking about ONU-C, in the second ONUB. ONU-C uses xDSL technology to connect end participants, meaning an existing 75

Select target paragraph3

Connect to a paragraph
Connect to an entity
Disable highlights
Add to table of contents