10.4.13.R.01.
Rationale
A visible gap between equipment cabinets will make any cross-cabling obvious and will simplify inspections for unauthorised or compromising
changes.
10.4.13.C.01. ControlSystem Classification(s): Confidential, Secret, Top Secret; Compliance: MUST
[CID:2374]
Equipment cabinets MUST have a visible gap or non-conductive isolator between cabinets of different classifications.
10.4.13.C.02. ControlSystem Classification(s): All Classifications; Compliance: SHOULD
[CID:2375]
There SHOULD be a visible inspectable gap or non-conductive isolator between equipment cabinets of different classifications.
10.5. Cable Labelling and Registration
Objective
10.5.1. To facilitate cable management, and identify unauthorised additions or tampering.
Context
Scope
10.5.2. This section covers information relating to the labelling of cabling infrastructure installed in secure areas.
Applicability of controls within this section
10.5.3. The controls within this section are applicable only to communications infrastructure located within facilities in New Zealand. For deployable platforms
or facilities outside New Zealand, Emanation Security Threat Assessments (Section 10.7) of this chapter of this manual MUST be consulted.
Rationale & Controls
10.5.4.
Conduit label specifications
10.5.4.R.01.
Rationale
Conduit labelling of a specific size and colour will facilitate identifying secure conduits.
10.5.4.C.01.
ControlSystem Classification(s): All Classifications; Compliance: MUST
[CID:2387]
Agencies MUST comply with the conduit label colours specified in the following table.
10.5.5.
Classification
Cable colour
Compartmented Information (SCI)
Orange/Yellow/Teal or other colour
TOP SECRET
Red
SECRET
Blue
CONFIDENTIAL
Green
RESTRICTED and all lower classifications
Black
Installing conduit labelling
10.5.5.R.01.
Rationale
Conduit labelling in public or reception areas should not draw undue attention to the level of classified processing or any other agency
capability.
10.5.5.C.01.
ControlSystem Classification(s): All Classifications; Compliance: SHOULD NOT
[CID:2390]
Conduit labels installed in public or visitor areas SHOULD NOT be labelled in such a way as to draw attention to or reveal classification of data
processed or other agency capability.
10.5.6.
Labelling wall outlet boxes
10.5.6.R.01.
Rationale
Clear labelling of wall outlet boxes reduces the possibility of incorrectly attaching IT equipment of a lesser classification to the wrong outlet.
10.5.6.C.01.
ControlSystem Classification(s): Confidential, Secret, Top Secret; Compliance: MUST
[CID:2393]
Wall outlet boxes MUST denote the classification, cable and outlet numbers.
10.5.6.C.02.
ControlSystem Classification(s): All Classifications; Compliance: SHOULD
[CID:2394]
Wall outlet boxes SHOULD denote the classification, cable and outlet numbers.
10.5.7.
Standard operating procedures
10.5.7.R.01.
Rationale
Recording labelling conventions in SOPs facilitates maintenance and fault finding.
10.5.7.C.01.
ControlSystem Classification(s): All Classifications; Compliance: SHOULD
[CID:2397]
The SOPs SHOULD record the site conventions for labelling and registration.
10.5.8.
105
Labelling cables
Version_3.5__January-2022
Select target paragraph3
Connect to a paragraph
Connect to an entity
Disable highlights
Add to table of contents