Attack on authentication keys on the card
Key diversification
Strong key management
Incident detection and management
Chip Hacking
Use of approved cryptographic algorithms and protocols on the card
Tamper protection
Incident detection and management
Malware
Update and patching for all system components
Incident detection and management
Backend systems
System hardening
Update and patching for all system components
Intrusion detection
Incident detection and management
Product Selection
11.7.22. A number of protection profiles related to smartcards and related devices and systems are provided on the Common Criteria website. Refer also to
Chapter 12 – Product Security.
Secure Access Module
11.7.23. A Secure Access Module (or Secure Application Module - SAM) is used to enhance the security and cryptographic performance of devices. SAMs are
commonly found in devices needing to perform secure transactions, such as payment terminals. It can be used for cryptographic computation and
secure authentication against smart cards or contactless payment cards.
11.7.24. Physically a SAM card can either be a separate component and plugged into a device when required or incorporated into an integrated circuit. A
typically use is for the secure storage of cryptographic keys or other sensitive data. SAM hardware and software are designed to prevent information
leakage and incorporates countermeasures against electromagnetic radiation, timing measurements, and other side channel attacks. These properties
mean that SAMs offer a much higher level of protection than the terminals and readers, which often utilise general-purpose computers.
11.7.25. SAM’s typically support 3DES and AES cryptographic algorithms and SHA hashing algorithms in their hardware cryptographic co-processor
implementations. Refer to Chapter 17 for information on approved cryptographic algorithms and protocols. It is important to note that 3DES is
approved for use on legacy systems only and SHA-1 is not an approved hashing algorithm.
Card Protection
11.7.26. RFID blocking wallets and RFID card sleeves are available to block RFID frequencies. These are typically used for the protection of credit and other
payment, access, transit cards and e-passports as a countermeasure for skimming attacks.
References - Guidance
11.7.27. Further references on Guidance can be found at:
Reference
Title
Publisher
Establishing Security Best
Source
Rohr, Nohl and Plotz
http://www.git-security.com/file/track/5743/1
Common Criteria Protection
Profiles
Common Criteria
https://www.commoncriteriaportal.org/pps/
Defending Risky Electronic
NSA
https://www.nsa.gov/ia/_files/security_configurati
Practices in Access Control
Access Points into a
on/Defending_Risky_Electronic_Access_Points.pdf
“Closed” Industrial Control
System (ICS) Network
Perimeter
References - Standards
11.7.28. Further references on standards can be found at:
Reference
ISO/IEC 7816-1:2011
Title
Publisher
Source
Identification cards -- Integrated
ISO
https://www.iso.org/standard/54089.
circuit cards -- Part 1: Cards
html
with contacts -- Physical
characteristics
ISO/IEC 7816-2:2007
Identification cards -- Integrated
circuit cards -- Part 2: Cards
ISO
https://www.iso.org/standard/45989.
html
with contacts -- Dimensions and
location of the contacts
147
Version_3.5__January-2022
Select target paragraph3
Connect to a paragraph
Connect to an entity
Disable highlights
Add to table of contents