Treatment of media waste particles Following the destruction of SECRET and TOP SECRET media, normal accounting and verification processes and procedures do not apply. However, depending on the destruction method used, and the resulting media waste particle size, it may still need to be stored and handled as classified waste. Security Control: ISM-1728; Revision: 0; Updated: Dec-21; Applicability: S; Essential Eight: N/A The resulting media waste particles from the destruction of SECRET media is stored and handled as OFFICIAL if less than or equal to 3 mm, PROTECTED if greater than 3 mm and less than or equal to 6 mm, or SECRET if greater than 6 mm and less than or equal to 9 mm. Security Control: ISM-1729; Revision: 0; Updated: Dec-21; Applicability: TS; Essential Eight: N/A The resulting media waste particles from the destruction of TOP SECRET media is stored and handled as OFFICIAL if less than or equal to 3 mm, or SECRET if greater than 3 mm and less than or equal to 9 mm. Degaussing magnetic media Degaussing magnetic media changes its magnetic properties, thereby, permanently corrupting data. When degaussing magnetic media, care needs to be taken as a degausser of insufficient magnetic field strength will not be effective. In addition, since 2006 perpendicular magnetic media has progressively replaced longitudinal magnetic media. As some older degaussers are only capable of destroying longitudinal magnetic media, care needs to be taken to ensure that a degausser with a suitable magnetic orientation is also used. Furthermore, to ensure that degaussers are being used in the correct manner to effectively destroy magnetic media, product-specific directions provided by degausser manufacturers should be followed. Finally, to provide an additional level of assurance following the use of a degausser, magnetic media should be physically damaged by deforming any internal platters. Security Control: ISM-0361; Revision: 4; Updated: Dec-21; Applicability: All; Essential Eight: N/A Magnetic media is destroyed using a degausser with a suitable magnetic field strength and magnetic orientation. Security Control: ISM-0362; Revision: 4; Updated: Mar-22; Applicability: All; Essential Eight: N/A Product-specific directions provided by degausser manufacturers are followed. Security Control: ISM-1641; Revision: 2; Updated: Mar-22; Applicability: All; Essential Eight: N/A Following the use of a degausser, magnetic media is physically damaged by deforming any internal platters. Supervision of destruction To verify that media is appropriately destroyed, destruction processes need to be supervised by at least one person cleared to the sensitivity or classification of the media being destroyed. Security Control: ISM-0370; Revision: 5; Updated: Dec-21; Applicability: All; Essential Eight: N/A The destruction of media is performed under the supervision of at least one person cleared to its sensitivity or classification. Security Control: ISM-0371; Revision: 4; Updated: Dec-21; Applicability: All; Essential Eight: N/A Personnel supervising the destruction of media supervise its handling to the point of destruction and ensure that the destruction is completed successfully. Supervision of accountable material destruction The successful destruction of media storing accountable material is more important than for other media. As such, its destruction should be supervised by at least two personnel who sign a destruction certificate afterwards. Security Control: ISM-0372; Revision: 5; Updated: Dec-21; Applicability: O, P, S, TS; Essential Eight: N/A The destruction of media storing accountable material is performed under the supervision of at least two personnel cleared to its sensitivity or classification. 73

Select target paragraph3

Connect to a paragraph
Connect to an entity
Disable highlights
Add to table of contents