96
Ficora will, upon application, designate a notified body, which will have the task of issuing
opinions on the conformity of radio equipment and telecommunications terminal device,
stipulating specific radio test suites and certifying and supervising quality assurance systems
for such equipment. A notified body may be designated for a limited period. The application
must include the information necessary for processing the application as requested by Ficora.
A notified body shall be functionally and economically independent of any manufacturer of
radio or telecommunications devices. It shall have liability insurance or some other
corresponding arrangement that is adequate in view of the extent of its activities, and must
have at its disposal a sufficient number of professionally skilled personnel and systems,
equipment and tools required for its activities. The notified body shall possess a valid
accreditation decision by an accreditation entity or other accreditation organ that is party to an
agreement on mutual recognition as referred to in the Act on Verifying the Competence of
Conformity Assessment Services (920/2005), verifying that the body is competent to act as a
notified body in the meaning of subsection 1.
The activities of the notified body are supervised by Ficora. A notified body shall report on
those changes in its activities that may influence its capacity to function as a notified body. If
a notified body no longer fulfils the prescribed requirements or functions contrary to the
provisions, Ficora may revoke the designation.
In performing its duties under this Act, the notified body shall comply with the provisions of
the Administrative Procedure Act (434/2003), the Act on the Openness of Government
Activities and the Language Act (423/2003).
Further provisions on the requirements to be imposed on notified bodies and on the
documents demonstrating compliance with the requirements, which are to be attached to the
application, will be issued by Decree of the Ministry of Transport and Communications.
Section 256
Conformity assessment procedure
The conformity of telecommunications devices must be demonstrated by means of:
1) internal production control;
2) internal production control that includes specific radio test suites;
3) internal production control that includes specific radio test suites and an opinion of a
notified body;
4) internal production control that includes an opinion of a notified body;
5) an internal production audit as provided under the Electrical Safety Act (410/1996), or an
internal production audit that includes an opinion from a notified body; or
6) full quality assurance.
During every procedure referred to in subsection 1, the telecommunications device
manufacturer shall ensure that the device satisfies the essential requirements referred to in
section 254 and shall draw up a document declaring that the equipment conforms to these
requirements (declaration of conformity). The procedure referred to in subsection 1(2) above
also requires that the equipment is tested using specific radio test suites. In the procedure
referred to in subsection 1(3) and (4) above, a technical structure file based on the test results
of the specific radio test suites and the technical documentation prepared for the device must
also be presented to the notified body.
In assessment procedures other than in subsection 1(5), a negative opinion issued by a
notified body concerning the technical structure file for the device does not prevent the
manufacturer from placing the device on the market if the device satisfies the essential
requirements referred to in section 254.
Select target paragraph3
Connect to a paragraph
Connect to an entity
Disable highlights
Add to table of contents