97
In the procedure referred to in subsection 1(6) above, the manufacturer shall, in the design,
manufacture and inspection of the products, use a quality system certified by a notified body.
For supervision purposes, the manufacturer shall provide the notified body with the necessary
information and allow inspections of the manufacture, inspection, testing and storage
facilities. If the quality system no longer fulfils the requirements laid down in this Act, the
notified body may withdraw its certification.
The documentation for the conformity assessment procedure shall be drawn up in Finnish or
Swedish or in a language accepted by the notified body or Ficora. The manufacturer must
keep the documentation referred to above at the disposal of the national authorities of the
States in the European Economic Area for at least ten (10) years after the last piece of
telecommunications device has been manufactured. Ficora issues further regulations on the
procedure to be followed in verifying the conformity of telecommunications devices and on
the documentation to be drawn up in connection with this.
Section 257
Verifying the conformity of a radio transmitter
Where the manufacturer of a radio transmitter has applied the technical specification
adopted by a recognised standards body under a mandate from the Commission of the
European Union and for which the reference details have been published in the Official
Journal of the European Union (harmonised standard), the conformity of the radio transmitter
must be demonstrated using the assessment procedure referred to in section 256(1)(2, 3 or 6)
Where the manufacturer of a radio transmitter has not applied the harmonised standards or
has applied them only in part, the conformity of the radio transmitter shall be demonstrated
using the assessment procedure referred to in section 256(1)(3 or 6).
Section 258
Verifying the conformity of a radio receiver
The conformity of a radio receiver or the receiver components of a piece of radio equipment
shall be demonstrated using the assessment procedure referred to in section 256(1)(1, 3 or 6).
The conformity of a radio receiver designed solely for receiving television or radio
programmes shall be demonstrated using the assessment procedure referred to in
section 256(1)(1 or 5).
Section 259
Verifying the conformity of telecommunications terminal device
The conformity of telecommunications terminal device shall be demonstrated using the
assessment procedure referred to in section 256(1)(1, 4 or 6).
Section 260
Verifying the conformity of communications network devices
The conformity of communications network devices must be demonstrated using the
assessment procedure referred to in section 256(1)(5).
Select target paragraph3
Connect to a paragraph
Connect to an entity
Disable highlights
Add to table of contents