– A unique 128-bit Network Session Key shared between
the end-device and network server
– A unique 128-bit Application Session Key shared end-toend at the application level
AES encryption provides authentication and integrity of
packets to the network server and end-to-end encryption
to the application server. The keys can be Activated By
Personalisation (ABP) on the production line or during
commissioning or can be Over-The-Air Activated (OTAA) in
the field. OTAA allows devices to be re-keyed if necessary.
It is possible to use the LoRa physical layer and run a
different protocol on top of it, such as Symphony Link 251.
Sigfox is a proprietary LPWAN technology that enables
remote devices to connect to an access point over Ultra
Narrow Band (UNB) frequencies. Sigfox highlights that
devices never have the ability to send data to arbitrary
entities via internet and can therefore be considered to be
protected by a “firewall”. Furthermore, Sigfox devices have
the following security features252:
– Each Sigfox device is provisioned during manufacturing
with a unique symmetrical authentication key. Each
message to be sent or received by the device contains a
cryptographic token that is computed based on this
authentication key. Verification of the token ensures the
authentication of the sender (the device for an uplink
message, or the Sigfox network for a downlink message)
and the integrity of the message. Since the key is unique
per device, the compromising of one device has a very
limited impact. Sigfox has been working with its
ecosystem to increase the security level of devices
through the adoption of security best practices. In
addition, secure elements dedicated to Sigfox devices
are now available to provide tamper resistance.
251
252
253
254
https://www.link-labs.com/symphony
https://www.sigfox.com/en/technology/security
https://datatracker.ietf.org/wg/lpwan/about/
https://www.gsma.com/iot/news/
new-report-outlines-security-considerations-lpwa-technology/
– Each Sigfox message contains a sequence counter which
is verified by the Sigfox Core Network to detect and
discard replay attempts. The integrity of the counter is
guaranteed by the message authentication token.
– By default, data is conveyed over the air interface without
any encryption. However, depending on the application,
this data may be very sensitive, and its privacy must be
guaranteed. Sigfox gives customers the option to either
implement their own end-to-end encryption solutions or
to rely on an encryption solution provided by the Sigfox
protocol.
The IETF Working Group “IPv6 over Low Power Wide-Area
Networks” is currently focused on enabling IPv6
connectivity over several LPWAN technologies including
Sigfox, LoRa, WI-SUN and NB-IOT253.
The LPWAN Technology Security Comparison white paper 254
from GSMA and Franklin Heath discusses the security
implications and controls for the abovementioned LPWA
technologies, identifying that IoT security needs are driven
largely by privacy and safety concerns and suggesting that
any deployment using LPWA technologies should be subject
to a security risk assessment using tools such as the GSMA
IoT Security Assessment 255.
HyperText Transfer Protocol (HTTP) is the dominant
application-layer protocol for the Web and has proven to be
very suitable for the navigation of interactive, hyperlinked
webpages. For IoT devices, most of which support no direct
human interaction, consume very little power and frequently
have poor network connectivity, HTTP is unsuitable256: a
single HTTP request requires a minimum of nine TCP
packets, even without taking packet loss into account.
This overhead adds to IoT operating expenses.
255 https://www.gsma.com/iot/iot-security-assessment/
256 https://www.edn.com/electronics-blogs/eye-on-iot-/4437056/
Why-HTTP-Won-t-Work-for-IoT
75
Select target paragraph3
Connect to a paragraph
Connect to an entity
Disable highlights
Add to table of contents