MyMIS
4.4.3.2
Wireless Communication
Wireless applications involve the technology of presenting and
delivering wireless communication information to and from telephony
terminals, other wireless terminals, within a LAN and within networks.
A wireless application is utilised when a telephony terminal, e.g.
mobile phone communicates with a server installed in the mobile telephony
network.
Wireless LAN systems are usually made up of a cell or group of cells that
contain several wireless station adapters in each of them. Each cell is controlled
by an Access Point, (a device that is usually connected to an existing backbone),
and which manages all the traffic within the cell. Station adapters within the
coverage area of an access point (i.e. the cell) can communicate between
themselves, or gain access to wired LAN resources through the access
point. Station adapters associated with an access point are synchronised
with it by both frequency and clock, so they can transmit and receive
data to and from the access point. The same rule applies for interception
- in order for someone to intercept the data one must be within the coverage
area of the cell and be synchronised with the access point.
There are two types of wireless protocols that are widely used today. Direct
Sequence (and also narrow band) wireless LAN systems work in a predefined
constant frequency, i.e. when the user buys an access point or a station
adapter it is working in a certain constant frequency. In this case it is easier
to detect the frequency of the carrier wave and to synchronise with it. With
Frequency Hopping systems, the frequency of the carrier wave is continuously
changing. It is difficult to detect the current frequency of transmission and
even if it is possible, it changes within milliseconds.
Secure wireless connection can be assured by:
(a) implementing a secure wireless protocol that will uphold data integrity,
privacy, authentication and protect from denial-of-service;
(b) providing controls for the detection and reporting of dropped
communications and timely termination of all associated sessions;
and
(c) requiring re-authentication when wireless connection drops occur.
Eavesdropping of the wireless signalling can be prevented by:
(a) establishing a policy setting out conditions under which wireless
access is permissible;
(b) implementing, where business needs dictate, additional controls such
as, frequency hopping;
(c) encrypting classified information during electronic transmission; and
(d) protecting passwords by encryption.
Corruption or modification of information during transmission can be detected
by authenticating information with digital signature. Establishing a procedure
for safeguarding and use of wireless equipment can prevent unauthorised
use or interruption of wireless equipment such as wireless network access
equipment, wireless PC cards and Wireless Applications Protocol (WAP)
enabled devices.
Copyright MAMPU
Chapter 4 - 19
Select target paragraph3
Connect to a paragraph
Connect to an entity
Disable highlights
Add to table of contents