11.6.36. Other defensive measures, sometimes described as palliative techniques, include shielding, blocker tags, tag “kill” commands, tamper resistance and
temporary deactivation. It is important to note these techniques do not use encryption.
Shielding
11.6.37. RF shielding is designed to limit the propagation of RF signals outside of the shielded area. Shielding helps to prevent unauthorised reading, access to
or modification of the RFID tag data or interfering with RFID readers. Shielding can be applied to small, individual items, such as passports and credit
cards or to large elements such as shipping containers.
11.6.38. Shielding is also important where interference is present or detected. This may be caused by environmental conditions, such as operating in a port
area, or by deliberate attempts to access readers or tags.
11.6.39. Engineering assessments will determine the requirement for shielding from adverse environmental conditions and the risk assessment will determine
the likelihood and threat from unauthorised and deliberate attempts to access readers, tags and data.
11.6.40. RFID blocking wallets and RFID card sleeves are available to block RFID frequencies. These are typically used for credit and other payment, access
and transit cards and e-passports, as a countermeasure for skimming attacks or unauthorised tracking.
Blocker Tags
11.6.41. A special tag, called a “blocker” tag, blocks an RFID reader by simultaneously answering with 0 and 1 to every reader’s request during the
identification protocol. The reader is then incapable of distinguishing individual tags. The blocker tag may block a reader universally or within ranges.
11.6.42. This furnishes privacy by shielding consumers from the unwanted scanning of RFID tags that they may carry or wear. It also protects against
unauthorised readers and eavesdroppers. The blocker tag is an alternative to more simple solutions such as the kill command, shielding and active
jamming. It is important to note that active jamming may be illegal (see 11.6.53).
11.6.43. Blocker tags can also implement one or more privacy policies and multiple blocker tags may cover multiple zones. The blocker tag has a very low-cost
of implementation and standard tags need no modification and little support for password-protected bit flipping. A threat is that blocker tags can be
used to mount DoS attacks in which a malicious blocker tag universally blocks readers.
Tag “Kill” Command
11.6.44. The “kill” command is a password-protected command specified in the EPC Gen-1 and EPC Gen-2 standards intended to make a tag non-operational. A
typical application is anti-theft where the kill command is activated at a point-of-sale terminal, after goods have been paid for. Kill commands can be
password protected.
11.6.45. Kill commands function by fusing a ROM component or antenna connection by applying a large amount of power to the tag at the point of sale
reader/terminal. It is important to note that the antenna deactivation method does not completely kill the tag but rather disable its RF interface. Once in
the disabled state, the tag still retains data and can still function.
11.6.46. The kill feature can represent a threat to an RFID system if the password is compromised. This risk is particularly apparent where the same password is
used for multiple tags. If a weak (e.g., short or easily guessed) password is assigned to the kill command, tags can be disabled at will. Also important is
the longer a tag uses the same password, the more likely it is that the password will be compromised.
11.6.47. Data stored on the tag is still present in the tag’s memory after it is disabled (although it can no longer be accessed wirelessly), and, therefore, still
may be accessible with physical access to the tag.
Tamper Resistance
11.6.48. Some RFID tags are designed with tamper resistant or tamper-evident features to help prevent unauthorised alteration of removal of tags from the
objects to which they are attached. A simple type of tamper resistance is the use of a frangible, or easily broken, antenna. If this tag is removed, the
connection with the antenna is severed, rendering the tag inoperable. Other, more complex types of RFID systems monitor the integrity of objects
associated with the tags to ensure that the objects have not been compromised, altered, or subjected to extreme conditions.
11.6.49. Simple forms of tamper resistance may leave data intact and subject to the same threats described above. In addition it is possible to circumvent
tamper resistance mechanisms by repairing a frangible antenna. It is important to note that tamper-resistance and tamper-evidence technologies do
not prevent the theft or destruction of the tag or its associated items.
Temporary Deactivation
11.6.50. Some tags allow the RF interface to be temporarily deactivated. Methods vary amongst manufacturers with some methods requiring physical
intervention. Typically tags would be activated inside a designated area and deactivated when shipped, preventing eavesdropping or other
unauthorised transactions during shipment. When the tags arrive at their destination, they can be reactivated, for example for inventory
management. Conversely, tags can be used for tracking during shipment and may be deactivated on delivery.
RFID Risks and Controls Summary
11.6.51. A summary of RFID Risks and Controls is presented in the Table below:
Risk Control
Business Process
Business Intelligence
Privacy
Electro-Magnetic
Back-End System
Radiation
Attack
Tag Access Controls
Password
Authentication
HMAC
Digital Signature
Cover-Coding
135
Version_3.5__January-2022
Select target paragraph3
Connect to a paragraph
Connect to an entity
Disable highlights
Add to table of contents