the agency. This includes any material with an NZEO endorsement. 13.4.22.C.01. ControlSystem Classification(s): All Classifications; Compliance: SHOULD [CID:4230] Agencies SHOULD sanitise all media and IT Equipment prior to reuse at the same or higher classification. 13.4.23. Verifying sanitised media and IT Equipment 13.4.23.R.01. Rationale Verifying the sanitisation of media and IT Equipment with a different product to the one conducting the sanitisation process provides an independent level of assurance that the sanitisation process was conducted correctly. 13.4.23.C.01. ControlSystem Classification(s): All Classifications; Compliance: SHOULD [CID:4234] Agencies SHOULD verify the sanitisation of media and IT Equipment using a different product from the one used to perform the initial sanitisation. 13.5. Media and IT Equipment Destruction Objective 13.5.1. To ensure media and IT equipment that cannot be sanitised is safely destroyed before disposal in an environmentally responsible manner. Context Scope 13.5.2. This section covers information relating to the destruction of media and IT equipment. Further information relating to the destruction of IT equipment can be found in Section 12.6 - Product Sanitisation and Disposal. 13.5.3. Any IT, electrical or electronic equipment MUST be destroyed and disposed of in an environmentally safe and responsible manner. This reflects an increasing responsibility for improved equipment end-of-life treatment and environmentally responsible disposal solutions, while continuing to meet security and data protection requirements. Evolution of electronic components and equipment 13.5.4. The capability of various types of electronic equipment to store data has increased significantly with technology advances such as solid-state drives (SSDs) and on-board memory devices. In turn these present a rich target of opportunity to, amongst others, cyber-criminals, unauthorised investigators, and foreign intelligence services. Data may include, for example, identity, account numbers, physical addresses, transactions, cryptographic keys, strategic, financial or other private documents, and classified information. 13.5.5. Where data from a discarded device is recovered, it may also result in a privacy or data breach - potentially incurring sanction from data regulators. Electronic Waste (Waste Electrical and Electronic Equipment (WEEE)) 13.5.6. Media and IT equipment can contain a number of elements such as arsenic, lead, mercury, barium, selenium and cadmium in their manufacture. These elements can be poisonous, carcinogenic or toxic in particulate or dust form. If allowed to accumulate in dumps or poorly managed recycling or disposal centres, they can create a serious health risk or environmental hazard. 13.5.7. Lead was traditionally used in solder on printed circuit boards, although it has been banned in many countries in the last decade. Lead oxide may still be found in cathode-ray tubes and older equipment. Lead is toxic to humans and medical research has raised concerns about the impact of low-level exposure on the development of the brain and central nervous system in children. 13.5.8. Other elements used in the manufacture of IT and electronic equipment may include flame retardants and plasticisers, and should be treated with caution. 13.5.9. Some flame-retardant materials used in computers can be toxic if released as dust into the atmosphere. Research has shown that they interfere with brain and skeletal development. 13.5.10. Phthalates are probably best known as plasticisers and are widely used in the electronics industry. One of the most widely used phthalates, DEHP, is classified by the EU as toxic to reproductive health. For example, in 1999 an EU-wide ban was imposed on the use of six phthalates in children's chewable toys. Incinerators 13.5.11. There are many risks associated with the incineration of electronic waste. Up-to-date guidance is available on the Ministry for the Environment website (see reference table 13.5.21). 13.5.12. Incinerators discharge into the atmosphere and create emissions and ash residue. There is potential for contamination of air, soil and water through the release of pollutants such as hydrocarbons, heavy metals and dioxins. 13.5.13. There are two main by-products of incineration. Firstly, inert bottom ash which is primarily formed from inorganic elements, and secondly, flue gases. These facilities must include gas cleaning systems designed to contain pollutants and safely exhaust to the atmosphere. Properly designed, installed and operated facilities will be able to manage and safely dispose of the waste, particulate matter and contaminants produced by incineration. 13.5.14. It is essential that any incineration facility is properly rated, inspected and authorised or licenced to process WEEE. Any relevant national environmental legislation and regulation must also be complied with. In particular the Resource Management Act and the National Environmental Standards for Air Quality must be observed. 13.5.15. Some electrical and electronic waste materials cannot be safely incinerated. This includes: Alkaline batteries; Glass; Lithium batteries; and Mobile phones. Destruction 179 Version_3.5__January-2022

Select target paragraph3

Connect to a paragraph
Connect to an entity
Disable highlights
Add to table of contents