UAE Information Assurance Regulation
Implementation Guidance (for information purpose only)
The following guidelines should be considered and implemented where appropriate for physical security
perimeters:
a. security perimeters should be clearly defined, and the siting and strength of each of the perimeters
should depend on the security requirements of the assets within the perimeter and the results of a
risk assessment;
b. perimeters of a building or site containing information systems should be physically sound (i.e. there
should be no gaps in the perimeter or areas where a break-in could easily occur); the external walls
of the site should be of solid construction and all external doors should be suitably protected against
unauthorized access with control mechanisms, e.g. bars, alarms, locks etc.; doors and windows should
be locked when unattended and external protection should be considered for windows, particularly
at ground level;
c. a manned reception area or other means to control physical access to the site or building should be
in place; access to sites and buildings should be restricted to authorized personnel only;
d. physical barriers should, where applicable, be built to prevent unauthorized physical access and
environmental contamination;
e. all fire doors on a security perimeter should be alarmed, monitored, and tested in conjunction with
the walls to establish the required level of resistance in accordance to suitable regional, national, and
international standards; they should operate in accordance with local fire code in a failsafe manner;
f. suitable intruder detection systems should be installed to national, regional or international
standards and regularly tested to cover all external doors and accessible windows; unoccupied areas
should be alarmed at all times; cover should also be provided for other areas, e.g. computer room or
communications rooms;
g. information systems managed by the entity should be physically separated from those managed by
third parties.
105
Select target paragraph3
Connect to a paragraph
Connect to an entity
Disable highlights
Add to table of contents