UAE Information Assurance Regulation Implementation Guidance (for information purpose only) One method of controlling the security of large networks is to divide them into separate logical network domains, e.g. an entity’s internal network domains and external network domains, each protected by a defined security perimeter. A graduated set of controls can be applied in different logical network domains to further segregate the network security environments, e.g. publicly accessible systems, internal networks, and critical assets. The domains should be defined based on a risk assessment and the different security requirements within each of the domains. Such a network perimeter can be implemented by installing a secure gateway between the two networks to be interconnected to control access and information flow between the two domains. This gateway should be configured to filter traffic between these domains and to block unauthorized access in accordance with the entity’s access control policy. An example of this type of gateway is what is commonly referred to as a firewall. Another method of segregating separate logical domains is to restrict network access by using virtual private networks for user groups within the entity. Networks can also be segregated using the network device functionality, e.g. IP switching. Separate domains can then be implemented by controlling the network data flows using the routing/switching capabilities, such as access control lists. The criteria for segregation of networks into domains should be based on the access control policy and access requirements, and also take account of the relative cost and performance impact of incorporating suitable network routing or gateway technology. In addition, segregation of networks should be based on the value and classification of information stored or processed in the network, levels of trust, or lines of business, in order to reduce the total impact of a service disruption. T4.5.4 Security of Wireless Networks Priority Applicability P2 Based on risk assessment Control The entity shall ensure that all wireless networks are adequately secured. Sub-Control The entity shall: 1) undertake and document a site survey to determine the optimal physical locations to avoid stray signal leaking too far outside of the entity’s physical perimeter 2) identify criteria for grouping information services, users, and information systems into different groups that facilitate segregation on wireless networks 3) for each wireless network, identify the security controls that should be in place based on the required protection level of the information services, users, and information systems it supports 4) periodically evaluate the effectiveness of implemented segregation strategies and identify areas for improvement 144

Select target paragraph3

Connect to a paragraph
Connect to an entity
Disable highlights
Add to table of contents