regarding apparatus, including telecommunications terminal equipment and radio equipment
intended for the purposes of defence and state security.
Article 153. 1. Radio equipment placed on the market or put into service should meet the
requirements within the scope of:
1) protection of the health and safety of persons and domestic animals and the protection of
property,
2) effective use of frequency resources or orbital resources to avoid harmful interference,
3) electromagnetic compatibility stated in the provisions on electromagnetic compatibility,
within the scope resulting from their purpose.
1a. The scope of the requirements referred to in paragraph 1 point 1, shall in particular include
the following requirements:
1) the radio equipment, and in the absence of such possibility, the accompanying
documentation shall contain basic information, the knowledge and use of which is a condition
for the radio equipment to be used safely and for its intended purpose;
2) the radio equipment, including its component parts, is manufactured in a way that ensures
its safe and proper installation and connection;
3) in order to protect against the hazards caused by radio equipment, appropriate technical
measures shall be taken to ensure:
a) the protection of persons and domestic animals against the risk of physical injury or other
harm which may result from direct or indirect contact,
b) preventing the creation of temperature, arcs or radiation that could cause danger,
c) the protection of persons, domestic animals and property from non-electrical hazards
which, as is apparent from experience, may be caused by radio equipment,
d) insulation suitable for the envisaged conditions;
4) in order to protect against the hazards that may result from the influence of external factors
on radio equipment, appropriate technical measures shall be taken to ensure that this radio
equipment does not expose persons, domestic animals and property to hazards arising from:
a) its mechanical properties,
b) non-mechanical influences, under predictable environment conditions,
c) overloads, in predictable circumstances;
5) radio equipment is designed and manufactured in such a way as to ensure that it complies
with the hazard protection rules referred to in points 3 and 4 when used in the proper manner
and maintained in suitable technical condition.
1b. Radio equipment should also meet the additional requirements of the European Union law
and the executive provisions issued pursuant to paragraph 2.
2. The Minister competent for digitalization may, in the event of the adoption by the European
Commission of delegated acts referred to in Article 3 (3) of Directive 2014/53/EU of the
European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of
the Member States relating to the making available on the market of radio equipment and
repealing Directive 1999/5/EC (OJ L 153, 22.05.2014 p. 62), specify, by means of an
ordinance, additional requirements for particular categories or classes of radio equipment to
be met by radio equipment falling under these categories or classes and specify the date by
which devices not complying with the requirements of the ordinance may be placed on the
market or put into service, having regard to the safety of using radio equipment and the need
to ensure their effective interoperability with other equipment.
3. Radio equipment shall be subject to mandatory assessment of compliance with the
requirements referred to in paragraphs 1-1b.
3a. The manufacturer shall assess the compliance of radio equipment with the requirements.
Conformity assessment covers all envisaged operating conditions and, in the case of
Select target paragraph3
Connect to a paragraph
Connect to an entity
Disable highlights
Add to table of contents