wireless access points is ideal, an organisation can choose to use PMK caching and pre-authentication if they have a business requirement for fast roaming. If PMK caching is used, the PMK caching period should not be set to greater than 1440 minutes (24 hours). Security Control: ISM-1330; Revision: 1; Updated: Sep-18; Applicability: All; Essential Eight: N/A The PMK caching period is not set to greater than 1440 minutes (24 hours). Fast Basic Service Set Transition The WPA3 standard specifies support for Fast Basic Service Set Transition (FT) (802.11r). FT is a feature designed to improve user mobility and combat lag introduced by the need to authenticate to each wireless access point. However, FT requires authenticators to request and send keys to other authenticators within a security domain. If any of these keys are intercepted, all security properties are lost. Therefore, it is imperative that communications are appropriately secured. As such, FT should be disabled unless it can be confirmed that authenticator-to-authenticator communications are secured by a suitable ASD-Approved Cryptographic Protocol that provides confidentiality, integrity and mutual authentication. Security Control: ISM-1712; Revision: 1; Updated: Mar-22; Applicability: All; Essential Eight: N/A The use of FT (802.11r) is disabled unless authenticator-to-authenticator communications are secured by an ASDApproved Cryptographic Protocol. Remote Authentication Dial-In User Service authentication Separate to the 802.1X authentication process is the RADIUS authentication process that occurs between authenticators and a RADIUS server. RADIUS is what is known as an authentication, authorisation and accounting protocol, and is intended to mediate network access. However, RADIUS is not secure enough to be used without protection. To protect credentials communicated between authenticators and a RADIUS server, communications should be encapsulated with an additional layer of encryption, such as RADIUS over Internet Protocol Security or RADIUS over Transport Layer Security. Security Control: ISM-1454; Revision: 2; Updated: Sep-21; Applicability: All; Essential Eight: N/A Communications between authenticators and a RADIUS server are encapsulated with an additional layer of encryption using RADIUS over Internet Protocol Security or RADIUS over Transport Layer Security. Interference between wireless networks When wireless networks are deployed in close proximity, there is the potential for interference to impact their availability, especially when operating on commonly used 802.11b/g (2.4 GHz) default channels of 1 and 11. Sufficiently separating wireless networks through the use of frequency separation can help reduce this security risk. This can be achieved by using wireless networks that are configured to operate on channels that minimise overlapping frequencies or by using both 802.11b/g (2.4 GHz) channels and 802.11n (5 GHz) channels. It is important to note though, if implementing a mix of 2.4 GHz and 5 GHz channels, not all devices may be compatible with 802.11n and able to connect to 5 GHz channels. Security Control: ISM-1334; Revision: 2; Updated: Sep-18; Applicability: All; Essential Eight: N/A Wireless networks implement sufficient frequency separation from other wireless networks. Protecting management frames on wireless networks An effective denial-of-service attack can be performed by exploiting unprotected management frames using inexpensive commercial hardware. The 802.11 standard provides no protection for management frames and therefore does not protect against spoofing or denial-of-service attacks. However, the 802.11w amendment specifically addresses the protection of management frames on wireless networks and should be enabled for WPA2. Note, in WPA3 this feature is built into the standard. 122

Select target paragraph3

Connect to a paragraph
Connect to an entity
Disable highlights
Add to table of contents