Non-volatile flash memory media is sanitised by overwriting it at least twice in its entirety with a random pattern
followed by a read back for verification.
Treatment of non-volatile flash memory media following sanitisation
Due to the use of wear levelling in non-volatile flash memory media, and the potentially for bad memory blocks, it is
possible that not all memory blocks will be overwritten during sanitisation processes. For this reason, SECRET and TOP
SECRET non-volatile flash memory media retains its classification following sanitisation.
Security Control: ISM-0360; Revision: 6; Updated: Dec-21; Applicability: S, TS; Essential Eight: N/A
Following sanitisation, SECRET and TOP SECRET non-volatile flash memory media retains its classification.
Media that cannot be successfully sanitised
In some cases, sanitisation processes will be unsuccessful due to faulty or damaged media. In such cases, the faulty or
damage media will need to be destroyed prior to its disposal.
Security Control: ISM-1735; Revision: 0; Updated: Dec-21; Applicability: All; Essential Eight: N/A
Faulty or damaged media that cannot be successfully sanitised is destroyed prior to its disposal.
Further information
Further information on recoverability of data from volatile media can be found in the Data Remanence in
Semiconductor Devices paper.
Further information on the random-access memory testing tool MemTest86 can be obtained from PassMark Software.
Further information on the graphics card random-access memory testing tools MemtestG80 and MemtestCL can be
obtained from their GitHub projects.
Further information on HDDerase is available from the Center for Memory and Recording Research at the University of
California San Diego. HDDerase is capable of calling the ATA secure erase command as well as resetting the hostprotected area and device configuration overlay table on non-volatile magnetic media.
Further information on reliably erasing data from solid state drives can be found in the Reliably Erasing Data From
Flash-Based Solid State Drives paper.
Media destruction
Media destruction processes and procedures
Documenting processes and procedures for media destruction will ensure that an organisation carries out media
destruction in an appropriate and consistent manner.
Security Control: ISM-0363; Revision: 3; Updated: Dec-21; Applicability: All; Essential Eight: N/A
Media destruction processes, and supporting media destruction procedures, are developed and implemented.
Media that cannot be sanitised
Some media types are incapable of being sanitised. As such, they will need to be destroyed prior to their disposal.
Security Control: ISM-0350; Revision: 5; Updated: Dec-21; Applicability: All; Essential Eight: N/A
The following media types are destroyed prior to their disposal:
microfiche and microfilm
optical discs
71
Select target paragraph3
Connect to a paragraph
Connect to an entity
Disable highlights
Add to table of contents