Sanitising fax machines
As fax machines can store pages that are ready for transmission in their memory, the memory should be sanitised prior
to the disposal of the fax machines. This can be achieved by removing the paper tray, transmitting a fax message with a
minimum length of four pages, then re-installing the paper tray and allowing a fax summary page to be printed. In
addition, any paper that becomes trapped in the paper path should be removed prior to disposal.
Security Control: ISM-1225; Revision: 2; Updated: Sep-18; Applicability: All; Essential Eight: N/A
The paper tray of the fax machine is removed, and a fax message with a minimum length of four pages is transmitted,
before the paper tray is re-installed to allow a fax summary page to be printed.
Security Control: ISM-1226; Revision: 2; Updated: Sep-18; Applicability: All; Essential Eight: N/A
Fax machines are checked to ensure no pages are trapped in the paper path due to a paper jam.
Further information
Further information on the sanitisation of media can be found in the media sanitisation section of the Guidelines for
Media.
Further information on the destruction of media can be found in the media destruction section of the Guidelines for
Media.
Further information on the sanitisation of network devices is available from vendors and can be found in evaluation
documentation on the Common Criteria’s Certified Products List.
ICT equipment disposal
ICT equipment disposal processes and procedures
Documenting processes and procedures for ICT equipment disposal will ensure that an organisation carries out ICT
equipment disposal in an appropriate and consistent manner.
Security Control: ISM-1550; Revision: 1; Updated: Dec-21; Applicability: All; Essential Eight: N/A
ICT equipment disposal processes, and supporting ICT equipment disposal procedures, are developed and implemented.
Disposal of ICT equipment
Before ICT equipment can be released into the public domain, it needs to be sanitised, destroyed or declassified. As
sanitised, destroyed or declassified ICT equipment still presents a security risk, albeit very minor, an appropriate
authority needs to formally authorise its release into the public domain. Furthermore, as part of disposal processes,
removing labels and markings indicating the owner, sensitivity, classification or any other marking that can associate
ICT equipment with its prior use will ensure it does not draw undue attention following its disposal.
Security Control: ISM-1217; Revision: 2; Updated: Dec-21; Applicability: All; Essential Eight: N/A
Labels and markings indicating the owner, sensitivity, classification or any other marking that can associate ICT
equipment with its prior use are removed prior to its disposal.
Security Control: ISM-0321; Revision: 4; Updated: Dec-21; Applicability: S, TS; Essential Eight: N/A
When disposing of ICT equipment that has been designed or modified to meet emanation security standards, the ACSC is
contacted for requirements relating to its disposal.
Security Control: ISM-0316; Revision: 3; Updated: Dec-21; Applicability: All; Essential Eight: N/A
Following sanitisation, destruction or declassification, a formal administrative decision is made to release ICT
equipment, or its waste, into the public domain.
65
Select target paragraph3
Connect to a paragraph
Connect to an entity
Disable highlights
Add to table of contents