97 In the procedure referred to in subsection 1(6) above, the manufacturer shall, in the design, manufacture and inspection of the products, use a quality system certified by a notified body. For supervision purposes, the manufacturer shall provide the notified body with the necessary information and allow inspections of the manufacture, inspection, testing and storage facilities. If the quality system no longer fulfils the requirements laid down in this Act, the notified body may withdraw its certification. The documentation for the conformity assessment procedure shall be drawn up in Finnish or Swedish or in a language accepted by the notified body or Ficora. The manufacturer must keep the documentation referred to above at the disposal of the national authorities of the States in the European Economic Area for at least ten (10) years after the last piece of telecommunications device has been manufactured. Ficora issues further regulations on the procedure to be followed in verifying the conformity of telecommunications devices and on the documentation to be drawn up in connection with this. Section 257 Verifying the conformity of a radio transmitter Where the manufacturer of a radio transmitter has applied the technical specification adopted by a recognised standards body under a mandate from the Commission of the European Union and for which the reference details have been published in the Official Journal of the European Union (harmonised standard), the conformity of the radio transmitter must be demonstrated using the assessment procedure referred to in section 256(1)(2, 3 or 6) Where the manufacturer of a radio transmitter has not applied the harmonised standards or has applied them only in part, the conformity of the radio transmitter shall be demonstrated using the assessment procedure referred to in section 256(1)(3 or 6). Section 258 Verifying the conformity of a radio receiver The conformity of a radio receiver or the receiver components of a piece of radio equipment shall be demonstrated using the assessment procedure referred to in section 256(1)(1, 3 or 6). The conformity of a radio receiver designed solely for receiving television or radio programmes shall be demonstrated using the assessment procedure referred to in section 256(1)(1 or 5). Section 259 Verifying the conformity of telecommunications terminal device The conformity of telecommunications terminal device shall be demonstrated using the assessment procedure referred to in section 256(1)(1, 4 or 6). Section 260 Verifying the conformity of communications network devices The conformity of communications network devices must be demonstrated using the assessment procedure referred to in section 256(1)(5).

Select target paragraph3

Connect to a paragraph
Connect to an entity
Disable highlights
Add to table of contents