Key Provisioning The provisioning of cryptographic keys into devices is a critical initial step in establishing a security baseline. This provisioning is done in one of three ways224: – Pre-provisioning: Secure Elements (SEs) destined for IoT devices are typically purchased from a silicon vendor with all required keys pre-provisioned on the chip by this vendor. This means that the IoT device maker does not need to deal with provisioning keys for his device, but the SE approach comes with downsides such as increased costs and complexity in purchasing, supply chain and inter-chip interfacing. – Key Injection: Cryptographic keys can be injected into a device at different points in the supply chain. After injection, the keys are stored on the device. Most widely used embedded key storage methods are based on NonVolatile Memory (NVM) such as Electrically Erasable Programmable Read Only Memory (EEPROM), Flash, or One-Time Programmable (OTP) memory such as fuses and anti-fuses. With these memory types, the provisioning of root keys comes with trade-offs among flexibility, key-exposure liability, cost, reliability and security. Pre-provisioning: The use of a secure element may increase cost and complexity – On-board Key Generation: An internal Random Number Generator (RNG) on the chip can derive a random secret and use it to generate cryptographic keys. This method increases the flexibility within the supply chain compared to key injection (assuming the target chip contains a random number generator), but it does not make any difference regarding how the root key is stored. 5.8.2 Key Findings – A hardware RoT is the only immutable trust anchor; the chain of trust should build on a hardware RoT. Currently, only 4% of IoT devices use a hardware RoT.225 – RoT-based cybersecurity can be provided by several solutions including Secure Elements, TPMs, TEEs, Cisco Trust Anchor, Microsoft’s Pluton Security Subsystem, and SIM cards. – Solutions to secure firmware and booting are being proposed as a joint effort of the hardware and software industry, however, their adoption for IoT devices is still in the initial stage. Key injection: non-volatile memory can be provisioned with keys early in the supply chain On-board Key Generation: Using an RNG, keys can be generated internally on the chip Figure 20: Key Provisioning (Source: Intrinsic ID) 224 Protecting the IoT With Invisible Keys, Intrinsic ID Whitepaper, 2018 225 IoT Security from Design to Lifecycle Management, An Embedded Perspective; ABI Research, 2018. 67

Select target paragraph3

Connect to a paragraph
Connect to an entity
Disable highlights
Add to table of contents