Figure 11: Separation of RED/BLACK
Separation of Cable Runs
10.6.19. In order to maintain the integrity of RED/BLACK separation, cables for power and data should be separately bundled as powerRED or BLACK and
data RED or BLACK. Cables should be run with as much distance between the bundles as can be practically managed, within the constraints of cable
feeds and rack configuration. Ideally RED and BLACK should be on opposite sides of the rack. Cables should be no longer than required to avoid
overlength cables compromising separation.
Access to BLACK equipment and components by uncleared staff and contractors
10.6.20. In some instances there may be a requirement for external technical or other uncleared personnel to accessBLACK equipment and components for
servicing, repair or replacement. Care must be taken to maintain the integrity of RED equipment and components. This can be especially problematic
in shared rack configurations as described above.
This requirement should be identified before installation takes place and segregation measures implemented. Ideally physical separation ofBLACK
from RED is the best solution, recognising however, this may not always be possible or practical. Other solutions may include, for example, a shared
rack that has two doors with the RED door locked and alarmed so that BLACK equipment can be accessed without compromising the security ofRED
equipment. Discussion with the GCSB may identify other practical solutions.
References
10.6.21. Further References avaliable below:
Reference
ISO/IEC 11801-5:2017
Title
Data centres
Publisher
ISO
Source
https://www.iso.org/standard/62247.
html
ISO/IEC TR 14763-2-1:2011
Information technology --
ISO
Implementation and operation
of customer premises cabling --
https://www.iso.org/standard/55236.
html
Part 2-1: Planning and
installation - Identifiers within
administration systems
ANSI/TIA-606-B
Administration Standard for the
ANSI
https://www.ansi.org
ANSI
https://www.ansi.org
Telecommunications
Infrastructure of Commercial
Buildings
ANSI/TIA-942
Telecommunications Infrastructure
Standard for Data Centers
PD IEC/TR 62691:2016
Optical fibre cables. Guidelines
to the installation of optical
fibre cables
PD IEC/TR 62362:2010
Selection of optical fibre cable
specifications relative to
mechanical, ingress, climatic or
International Electrotechnical
https://www.standards.govt.nz
Commission (IEC) Available
through Standards New Zealand
International Electrotechnical
https://www.standards.govt.nz
Commission (IEC) Available
through Standards New Zealand
electromagnetic characteristics.
Guidance
108
Version_3.5__January-2022
Select target paragraph3
Connect to a paragraph
Connect to an entity
Disable highlights
Add to table of contents