Objective
Recommended Control 04:
Recommended Control 05:
Recommended Control 06:
Recommended Control 07:
Recommended Control 08:
Recommended Control 09:
Recommended Control 10:
Recommended Control 11:
Recommended Control 12:
Recommended Control 13:
Recommended Control 14:
Recommended Control 15:
Recommended Control 16:
Recommended Control 17:
Wireless local area networks are deployed in a secure manner
that does not compromise the security of information and
systems
The PMK caching period shouldnot be set to greater than 1440
minutes (24 hours)
If pre‐shared keys are used, agencies should use random keys of
the maximum allowable length
Agencies shouldnot use pre‐shared keys for wireless
authentication
Agencies should disable the administrative interface on wireless
access points for wireless connections
Wireless access points and devices should be upgraded to
support a minimum of the 802.11w amendment
The SSID of a wireless network shouldnot be readily associated
with an agency, the premises, location or the functionality of the
network
Agencies shouldnot disable SSID broadcasting on wireless
networks
Agencies should use the Dynamic Host Configuration Protocol
(DHCP) for assigning IP addresses on wireless networks
MAC address filtering shouldnot be used as a security mechanism
to restrict which devices connect to a wireless network
Key generation, distribution and rekeying procedures should be
documented in the SecPlan for the wireless network
Wireless device drivers and their versions should be documented
in the SecPlan for the wireless network
Agencies shouldnot allow agency devices to connect to non‐
agency controlled wireless networks
Connections between wireless networks and fixed networks
should be treated in the same way as connections between fixed
networks and the Internet
Wireless networks should be sufficiently segregated through the
use of channel separation
When connecting devices via Ethernet to an agency’s fixed network, agencies need to be aware of
the risks posed by active wireless functionality. Devices may automatically connect to any open
wireless networks they have previously connected to, which a malicious actor can use to
masquerade and establish a connection to the device. This compromised device could then be used
as a bridge to access the agency’s fixed network. Disabling wireless functionality on devices,
preferably by a hardware switch, whenever connected to a fixed network can prevent this from
occurring. Additionally, devices do not have to be configured to remember and automatically
102
Select target paragraph3
Connect to a paragraph
Connect to an entity
Disable highlights
Add to table of contents