Objective Recommended Control 04: Recommended Control 05: Recommended Control 06: Recommended Control 07: Recommended Control 08: Recommended Control 09: Recommended Control 10: Recommended Control 11: Recommended Control 12: Recommended Control 13: Recommended Control 14: Recommended Control 15: Recommended Control 16: Recommended Control 17: Wireless local area networks are deployed in a secure manner that does not compromise the security of information and systems The PMK caching period shouldnot be set to greater than 1440 minutes (24 hours) If pre‐shared keys are used, agencies should use random keys of the maximum allowable length Agencies shouldnot use pre‐shared keys for wireless authentication Agencies should disable the administrative interface on wireless access points for wireless connections Wireless access points and devices should be upgraded to support a minimum of the 802.11w amendment The SSID of a wireless network shouldnot be readily associated with an agency, the premises, location or the functionality of the network Agencies shouldnot disable SSID broadcasting on wireless networks Agencies should use the Dynamic Host Configuration Protocol (DHCP) for assigning IP addresses on wireless networks MAC address filtering shouldnot be used as a security mechanism to restrict which devices connect to a wireless network Key generation, distribution and rekeying procedures should be documented in the SecPlan for the wireless network Wireless device drivers and their versions should be documented in the SecPlan for the wireless network Agencies shouldnot allow agency devices to connect to non‐ agency controlled wireless networks Connections between wireless networks and fixed networks should be treated in the same way as connections between fixed networks and the Internet Wireless networks should be sufficiently segregated through the use of channel separation When connecting devices via Ethernet to an agency’s fixed network, agencies need to be aware of the risks posed by active wireless functionality. Devices may automatically connect to any open wireless networks they have previously connected to, which a malicious actor can use to masquerade and establish a connection to the device. This compromised device could then be used as a bridge to access the agency’s fixed network. Disabling wireless functionality on devices, preferably by a hardware switch, whenever connected to a fixed network can prevent this from occurring. Additionally, devices do not have to be configured to remember and automatically 102

Select target paragraph3

Connect to a paragraph
Connect to an entity
Disable highlights
Add to table of contents